Lldp - Hirschmann RS20 Reference Manual

summary
Display remote data in summary format (table with most important
data only, strings will be truncated if necessary, indicated by an
appended '>' character).
sys-desc
Display the remote data's system description only.
sys-name
Display the remote data's system name only.

4.8.13 lldp

Enable/disable the LLDP/IEEE802.1AB functionality on this device. If dis-
abled, the LLDP protocol will become inactive, but the LLDP MIBs can still be
accessed. This command is a shorthand notation for lldp config chas
sis admin-state {off|on} (see
page 153).
The default setting is on.
Format
lldp
Mode
Global Config
no lldp
U
Disable the LLDP/IEEE802.1AB functionality on this device.
Format
no lldp
Mode
Global Config
152
4.8 LLDP - Link Layer Discovery Protocol
"lldp config chassis admin-state" on
CLI L2B
Release 4.0 11/07