Copy - Hirschmann RS20 Reference Manual

4.7.11 copy

This command uploads and downloads to/from the switch. Remote URLs
can be specified using tftp. A list of valid commands is provided below.
The command can be used to the save the running configuration to nvram by
specifying the source as system:running-config and the destination as
nvram:startup-config.
Default
none
Format
copy nvram:errorlog <url>
copy nvram:log <url>
copy nvram:startup-config system:running-config
copy nvram:startup-config <url>
copy nvram:traplog <url>
copy system:running-config nvram:startup-config
copy <url> nvram:startup-config
copy <url> system:image
Mode
Privileged EXEC
138
4.7 System Utilities
CLI L2B
Release 4.0 11/07