Monitor Session - Hirschmann RS20 Reference Manual

4.5.4

monitor session

This command configures a probe port and a monitored port for monitor ses-
sion (port monitoring). The first slot/port is the source monitored port and the
second slot/port is the destination probe port. If this command is executed
while port monitoring is enabled, it will have the effect of changing the probe
and monitored port values.
Format
monitor session [mode | {source | destination}
interface <slot/port>]
Mode
Global Config
no monitor session
U
This command removes the monitor session (port monitoring) designa-
tion from both the source probe port and the destination monitored port.
Format
no monitor session
Mode
Global Config
CLI L2B
Release 4.0 11/07
4.5 Device Configuration Commands
101