CLI Commands: Switching
5.3 DHCP Relay Commands
These commands configure the DHCP Relay parameters. The commands
are divided by functionality into these different groups:
D
Configuration Commands are used to configure features and options of
the switch. For every configuration command there is a show command
that will display the configuration setting.
D
Show commands are used to display switch settings, statistics and other
information.
D
No commands clear some or all of the settings to factory defaults.
5.3.1 show dhcp-relay
Display the settings of the BOOTP/DHCP relay.
Format
show dhcp-relay [opt82 | port {<slot/port>|all} |
server-address]
Mode
Privileged EXEC and User EXEC
CLI L2B
Release 4.0 11/07
5.3 DHCP Relay Commands
191