Security Commands; Users Defaultlogin - Hirschmann RS20 Reference Manual

CLI Commands: Security

6.1 Security Commands

6.1.1 users defaultlogin

This command assigns the authentication login list to use for non-configured
users when attempting to log in to the system. This setting is overridden by
the authentication login list assigned to a specific user if the user is config-
ured locally. If this value is not configured, users will be authenticated using
local authentication only.
Format
users defaultlogin <listname>
Mode
Global Config
CLI L2B
Release 4.0 11/07
6.1 Security Commands
197