Show Sntp Client - Hirschmann RS20 Reference Manual

transmit-interval
Show the SNTP Server's interval for sending Anycast messages
(unit: seconds).
4.9.3

show sntp client

This command shows all SNTP anycast configuration settings.
Format
show sntp client
Mode
Privileged EXEC and User EXEC
accept-broadcast
Show if the SNTP Client accepts SNTP broadcasts.
offset
Show the local time's offset (in minutes) with respect to UTC (positive
values for locations east of Greenwich).
request-interval
Show the SNTP Client's request interval (unit: seconds).
server
Show the SNTP Client's server IP addresses.
server primary
Show the SNTP Client's primary server IP addresses.
server secondary
Show the SNTP Client's redundant server IP addresses.
164
4.9 SNTP - Simple Network Time Protocol
CLI L2B
Release 4.0 11/07