Device-Status - Hirschmann RS20 Reference Manual

4.7.12 device-status

This command configures the device status link error monitoring for this port.
Default
ignore
Format
device-status connection-error {ignore|propagate}
Mode
Interface Config
4.7.13 device-status
This command configures the device-status.
Format
device-status {monitor {aca-removal|all
|connection-error|fan-broken
|module-removal
|power-supply-1| power-supply-2
|power-supply-3-1|power-supply-3-2
|power-supply-4-1|power-supply-4-2
|temperature} {error|ignore}
|trap {disable|enable} }
Mode
Global Config
monitor
Determines the monitoring of the selected event or all events.
– error If the given event signals an error, the device state will also
signal error,
– ignore Ignore the given event - even if it signals an error, the
device state will not signal 'error' because of that.
CLI L2B
Release 4.0 11/07
4.7 System Utilities
139