Logging Host; Logging Host Reconfigure - Hirschmann RS20 Reference Manual

CLI Commands: Base

4.4.5 logging host

This command enables logging to a host where up to eight hosts can be
configured.
Default
Port - 514; Level - Critical;
Format
logging host <hostaddress> [<port> [<severi
tylevel>]]
Mode
Global Config
Severity number Sevirity name
0 emergency
1 alert
2 critical
3 error
4 warning
5 notice
6 info
7 debug
Tab. 15: Possible severity levels

4.4.6 logging host reconfigure

The Logging Host Index for which to change the IP Address.
Format
logging host reconfigure <hostindex> <hostaddress>
96
Meaning
Minimum severity to be logged is 0. This is the
highest level and will result in all other messages of
lower levels not being logged.
Minimum severity to be logged is 1.
Minimum severity to be logged is 2.
Minimum severity to be logged is 3.
Minimum severity to be logged is 4.
Minimum severity to be logged is 5.
Minimum severity to be logged is 6.
Minimum severity to be logged is 7. This is the lowest
level and will result in messages of all levels being
logged.
4.4 Syslog Commands
CLI L2B
Release 4.0 11/07