Hirschmann RS20 Reference Manual page 46

CLI Commands: Base
Broadcast Packets Transmitted - The total number of packets that
higher-level protocols requested be transmitted to the Broadcast
address, including those that were discarded or not sent.
Transmit Errors
Total Errors - The sum of Single, Multiple, and Excessive Collisions.
Tx FCS Errors - The total number of packets transmitted that had a
length (excluding framing bits, but including FCS octets) of between
64 and 1518 octets, inclusive, but had a bad Frame Check Sequence
(FCS) with an integral number of octets
Oversized - The total number of frames that exceeded the max per-
mitted frame size. This counter has a max increment rate of 815
counts per sec. at 10 Mb/s.
Underrun Errors - The total number of frames discarded because
the transmit FIFO buffer became empty during frame transmission.
Transmit Discards
Total Discards - The sum of single collision frames discarded, multi-
ple collision frames discarded, and excessive frames discarded.
Single Collision Frames - A count of the number of successfully
transmitted frames on a particular interface for which transmission is
inhibited by exactly one collision.
Multiple Collision Frames - A count of the number of successfully
transmitted frames on a particular interface for which transmission is
inhibited by more than one collision.
Excessive Collisions - A count of frames for which transmission on
a particular interface fails due to excessive collisions.
Port Membership - The number of frames discarded on egress for
this port due to egress filtering being enabled.
Protocol Statistics
BPDU's received - The count of BPDU's (Bridge Protocol Data Units)
received in the spanning tree layer.
BPDU's Transmitted - The count of BPDU's (Bridge Protocol Data
Units) transmitted from the spanning tree layer.
802.3x Pause Frames Received - A count of MAC Control frames
received on this interface with an opcode indicating the PAUSE oper-
ation. This counter does not increment when the interface is operating
in half-duplex mode.
GVRP PDU's Received - The count of GVRP PDU's received in the
GARP layer.
46
4.1 System Information and Statistics Com-
CLI L2B
Release 4.0 11/07