Show Serial - Hirschmann RS20 Reference Manual

CLI Commands: Base

4.3.10 show serial

This command displays serial communication settings for the switch.
Format
show serial
Mode
Privileged EXEC and User EXEC
Serial Port Login Timeout (minutes)
Specifies the time, in minutes, of inactivity on a Serial port connection,
after which the Switch will close the connection. Any numeric value
between 0 and 160 is allowed, the factory default is 5. A value of 0
disables the timeout.
CLI L2B
Release 4.0 11/07
4.3 Management Commands
71