Snmp Trap Listing - Hirschmann MS30, Power MICE, MACH 4000, OCTOPUS User Manual

Industrial ethernet gigabit switch
Hide thumbs Also See for MS30, Power MICE, MACH 4000, OCTOPUS:
Table of Contents

Advertisement

Operation Diagnostics

9.1.1 SNMP trap listing

All possible traps that can occur are listed in the following table.
Trap description
authenticationFailure
coldStart
hmAutoconfigAdapterTrap
Table 9: Possible traps
linkDown
linkUp
hmTemperature
hmPowerSupply
hmSigConRelayChange
newRoot
topologyChange
risingAlarm
fallingAlarm
hmPortSecurityTrap
hmModuleMapChange
hmBPDUGuardTrap
hmRingRedReconfig
hmRingRedCplReconfig
hmSNTPTrap
hmRelayDuplicateTrap
lldpRemTablesChangeTrap
Layer 2 Enhanced with Layer 2 Professional
Release 1.0 10/05
Meaning
is sent if a station attempts to access an agent without
permission.
is sent for a cold and warm start during the boot process
after successful management initialization.
is sent when the ACA AutoConfiguration Adapter is
inserted or removed.
is sent if the link to a port is interrupted.
is sent if the link to a port is re-established.
is sent if the temperature exceeds the limit set.
is sent if the status of the voltage supply changes.
is sent if the status of the signal contact changes.
is sent if the sending agent becomes the new root of the
spanning tree.
is sent if the transmission mode of a port changes.
is sent if an RMON alarm input exceeds the upper
threshold.
is sent if an RMON alarm input falls below the lower
threshold.
is sent if a MAC address is detected at the port which does
not correspond to the current settings of:
– hmPortSecPermission and
– hmPorSecAction set either to trapOnly (2) or
portDisable (3)
is sent, if the hardware configuration has changed.
is sent if a BPDU is received at a port although the BPDU
guard function is activated.
is sent if the configuration of the redundant ring changes.
is sent if the configuration of the redundant ring/network
coupling changes.
is sent if errors occur in connection with the SNTP protocol
(e.g. server not available).
is sent if a duplicate IP address is detected in connection
with the DHCP Option 82.
is sent if an entry in the topology table changes.
9.1 Sending traps
133

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rs30, ms20Rs20

Table of Contents