Hirschmann RS20 Reference Manual page 47

CLI Commands: Base
STP BPDUs Transmitted - Spanning Tree Protocol Bridge Protocol
Data Units sent
STP BPDUs Received - Spanning Tree Protocol Bridge Protocol
Data Units received
RST BPDUs Transmitted - Rapid Spanning Tree Protocol Bridge
Protocol Data Units sent
RSTP BPDUs Received - Rapid Spanning Tree Protocol Bridge Pro-
tocol Data Units received
MSTP BPDUs Transmitted - Multiple Spanning Tree Protocol Bridge
Protocol Data Units sent
MSTP BPDUs Received - Multiple Spanning Tree Protocol Bridge
Protocol Data Units received
Time Since Counters Last Cleared
The elapsed time, in days, hours, minutes, and seconds since the sta-
tistics for this port were last cleared.
The display parameters, when the argument is 'switchport, are as follows :
Octets Received - The total number of octets of data received by the
processor (excluding framing bits but including FCS octets).
Total Packets Received Without Error- The total number of packets
(including broadcast packets and multicast packets) received by the
processor.
Unicast Packets Received - The number of subnetwork-unicast
packets delivered to a higher-layer protocol.
Multicast Packets Received - The total number of packets received
that were directed to a multicast address. Note that this number does
not include packets directed to the broadcast address.
Broadcast Packets Received - The total number of packets
received that were directed to the broadcast address. Note that this
does not include multicast packets.
Receive Packets Discarded - The number of inbound packets which
were chosen to be discarded even though no errors had been
detected to prevent their being deliverable to a higher-layer protocol.
A possible reason for discarding a packet could be to free up buffer
space.
Octets Transmitted - The total number of octets transmitted out of
the interface, including framing characters.
CLI L2B
Release 4.0 11/07
4.1 System Information and Statistics Com-
47