Show Lldp Config Port - Hirschmann RS20 Reference Manual

4.8.10 show lldp config port

This command shows all LLDP configuration settings and states concerning
one or all ports.
Format
show lldp config port <{slot/port|all}>
Mode
Privileged EXEC and User EXEC
admin-state
Display the port's LLDP admin state (if LLDP/IEEE802.1AB frames
will be transmitted and/or received).
fdb-mode
Display the port's LLDP FDB mode.
hm-mode
Display the port's LLDP Hirschmann mode.
max-neighbors
Display the port's max. no. of LLDP neighbors.
notification
Display the port's LLDP notification (trap) setting.
tlv
Display the port's LLDP TLV settings (they determine which informa-
tion is included in the LLDP frames that are sent). The command is a
group command and will output several lines of data.
CLI L2B
Release 4.0 11/07
4.8 LLDP - Link Layer Discovery Protocol
149