Snmp Trap Listing - Hirschmann Power MICE User Manual

Operation Diagnostics

9.1.1 SNMP trap listing

All possible traps that can occur are listed in the following table.
Trap description
authenticationFailure
coldStart
hmAutoconfigAdapterTrap
linkDown
linkUp
hmTemperature
hmPowerSupply
hmSigConRelayChange
newRoot
topologyChange
risingAlarm
fallingAlarm
hmPortSecurityTrap
hmModuleMapChange
hmBPDUGuardTrap
hmMrpReconfig
hmRingRedReconfig
hmRingRedCplReconfig
hmSNTPTrap
hmRelayDuplicateTrap
lldpRemTablesChangeTrap
vrrpTrapNewMaster
vrrpTrapAuthFailure
Table 12: Possible traps
Basic - L3P
Release 3.1 06/07
Meaning
is sent if a station attempts to access an agent without
permission.
is sent for a cold and warm start during the boot process
after successful management initialization.
is sent when the ACA AutoConfiguration Adapter is
inserted or removed.
is sent if the link to a port is interrupted.
is sent if the link to a port is re-established.
is sent if the temperature exceeds the limit set.
is sent if the status of the voltage supply changes.
is sent if the status of the signal contact changes.
is sent if the sending agent becomes the new root of the
spanning tree.
is sent if the transmission mode of a port changes.
is sent if an RMON alarm input exceeds the upper
threshold.
is sent if an RMON alarm input falls below the lower
threshold.
is sent if a MAC address is detected at the port which does
not correspond to the current settings of:
– hmPortSecPermission and
– hmPorSecAction set either to trapOnly (2) or
portDisable (3)
is sent, if the hardware configuration has changed.
is sent if a BPDU is received at a port although the BPDU
guard function is activated.
is sent if the configuration of the MRP ring changes.
is sent if the configuration of the HIPER ring changes.
is sent if the configuration of the redundant ring/network
coupling changes.
is sent if errors occur in connection with the SNTP protocol
(e.g. server not available).
is sent if a duplicate IP address is detected in connection
with the DHCP Option 82.
is sent if an entry in the topology table changes.
is sent if an other router has become master for an inter-
face or a virtual address.
is sent, if the router receives a frame with invalid authenti-
cation from an other vrrp router.
9.1 Sending traps
167