Class Of Service (Cos) Commands - Hirschmann RS20 Reference Manual

CLI Commands: Base
4.2 Class of Service (CoS)
Commands
This chapter provides a detailed explanation of the QoS CoS commands.
The following commands are available.
The commands are divided into these different groups:
D
Configuration Commands are used to configure features and options of
the switch. For every configuration command there is a show command
that will display the configuration setting.
D
Show commands are used to display device settings, statistics and other
information.
Note: The 'Interface Config' mode only affects a single interface, whereas the
'Global Config' mode is applied to all interfaces.
56

4.2 Class of Service (CoS) Commands

CLI L2B
Release 4.0 11/07