Snmptrap - Hirschmann RS20 Reference Manual

CLI Commands: Base

4.3.32 snmptrap

This command adds an SNMP trap name. The maximum length of name is
16 case-sensitive alphanumeric characters.
Default
The default name for the six undefined community names is Delete.
Format
snmptrap <
Mode
Global Config
no snmptrap
U
This command deletes trap receivers for a community.
Format
no snmptrap <
Mode
Global Config
90
name> <ipaddr>
name> <ipaddr>
4.3 Management Commands
CLI L2B
Release 4.0 11/07