4.7
System Utilities
This section describes system utilities.
4.7.1
clear eventlog
Clear the event log. The CLI will ask for confirmation.
Answer y (yes) or n (no).
The CLI displays the end of this operation.
Format
clear eventlog
Mode
Privileged EXEC
4.7.2 traceroute
This command is used to discover the routes that packets actually take when
traveling to their destination through the network on a hop-by-hop basis.
<ipaddr> should be a valid IP address.
The optional port parameter is the UDP port used as the destination of pack-
ets sent as part of the traceroute. This port should be an unused port on the
destination system. [port] should be a valid decimal integer in the range of 0
(zero) to 65535. The default value is 33434.
Format
traceroute <ipaddr> [port]
CLI L2B
Release 4.0 11/07
4.7 System Utilities
133