Network Parms; Network Protocol - Hirschmann RS20 Reference Manual

CLI Commands: Base
Mode
Privileged EXEC
no network javascriptmode
U
When the user accesses the switch's web interface, the switch's web
server will deliver a HTML page that contains no JavaScript.
Format
no network javamode
Mode
Privileged EXEC

4.3.4 network parms

This command sets the IP Address, subnet mask and gateway of the router.
The IP Address and the gateway must be on the same subnet.
Format
network parms <ipaddr>
Mode
Privileged EXEC

4.3.5 network protocol

This command specifies the network configuration protocol to be used. If you
modify this value change is effective immediately. The parameter bootp in-
dicates that the switch periodically sends requests to a Bootstrap Protocol
CLI L2B
Release 4.0 11/07
4.3 Management Commands
<netmask> [gateway]
65