Users Snmpv3 Accessmode - Hirschmann RS20 Reference Manual

4.6.8 users snmpv3 accessmode

This command specifies the snmpv3 access privileges for the specified login
user. The valid accessmode values are readonly or readwrite. The
<username> is the login user name for which the specified access mode
applies. The default is readwrite for 'admin' user; readonly for all other
users
Default
admin -- readwrite; other -- readonly
Format
users snmpv3 accessmode <username> <readonly |
readwrite>
Mode
Global Config
no users snmpv3 accessmode
U
This command sets the snmpv3 access privileges for the specified login
user as readwrite for the 'admin' user; readonly for all other users.
The <username> is the login user name for which the specified access
mode will apply.
Format
no users snmpv3 accessmode <username>
Mode
Global Config
130
4.6 User Account Management Commands
CLI L2B
Release 4.0 11/07