Hirschmann RS20 Reference Manual page 54

CLI Commands: Base
Backplane Hardware Revision
The hardware´s revision number.
Backplane Hardware description
The hardware´s device description.
Serial Number (Backplane)
The hardware´s serial number.
Base MAC Address (Backplane)
The hardware´s base MAC address.
Number of MAC Addresses (Backplane)
The number of hardware MAC addresses.
Auto Config Adapter, State
The Auto Configuration Adapter's state.
Auto Config Adapter, Serial Number
The Auto Configuration Adapter's serial number (if present and
operative).
Fan Status
The status of the MACH 4000 fan.
Power Supply Information
The status of the power supplies.
Media Module Information
The description of each media module
– Description: media module type,
– Serial Number of the media modul (if available),
– SFP Part ID: SFP type (if available),
– SFP Serial No. of the SFP module (if available),
– SFP Supported: yes/no,
– SFP Temperature (°C, F)
– SFP Tx Pwr, SFP transmit power,
– SFP Rx Pwr, SFP receive power.
54
4.1 System Information and Statistics Com-
CLI L2B
Release 4.0 11/07