Clear Config - Hirschmann RS20 Reference Manual

Quick Start up
Quick Start up Downloading from TFTP Server
Before starting a TFTP server download, the operator must complete the
Quick Start up for the IP Address.
Command
copy <url> {nvram:startup-
config | system:image}
Table 12: Quick Start up Downloading from TFTP Server
Quick Start up Factory Defaults
Command

clear config

copy system:running-
config nvram:startup-
config
reboot
(or cold boot the switch) Enter yes when the prompt pops up that asks if
Table 13: Quick Start up Factory Defaults
26
2.2 System Info and System Setup
Details
Sets the destination (download) datatype to be an
image (system:image) or a configuration file
(nvram:startup-config).
The URL must be specified as:
tftp://ipAddr/filepath/fileName.
The nvram:startup-config option downloads the
configuration file using tftp and system:image
option downloads the code file.
Details
Enter yes when the prompt pops up to clear all
the configurations made to the switch.
Enter yes when the prompt pops up that asks if
you want to save the configurations made to the
switch.
you want to reset the system.
This is the users choice either reset the switch or
cold boot the switch, both work effectively.
CLI L2B
Release 4.0 11/07