Snmp-Server Enable Traps Stpmode - Hirschmann RS20 Reference Manual

CLI Commands: Base

4.3.31 snmp-server enable traps stpmode

This command enables the sending of new root traps and topology change
notification traps.
Default
enabled
Format
snmp-server enable traps stpmode
Mode
Global Config
no snmp-server enable traps stpmode
U
This command disables the sending of new root traps and topology
change notification traps.
Format
no snmp-server enable traps stpmode
Mode
Global Config
CLI L2B
Release 4.0 11/07
4.3 Management Commands
89