Users Login - Hirschmann RS20 Reference Manual

CLI Commands: Security

6.1.2 users login

This command assigns the specified authentication login list to the specified
user for system login. The <user> must be a configured <user> and the
<listname> must be a configured login list.
If the user is assigned a login list that requires remote authentication, all ac-
cess to the interface from all CLI, web, and telnet sessions will be blocked
until the authentication is complete.
Note that the login list associated with the 'admin' user can not be changed
to prevent accidental lockout from the switch.
Format
users login <user> <listname>
Mode
Global Config
198
6.1 Security Commands
Release 4.0 11/07
CLI L2B