Users Passwd - Hirschmann RS20 Reference Manual

4.6.7 users passwd

This command is used to change a password. The password should not be
more than eight alphanumeric characters in length. If a user is authorized for
authentication or encryption is enabled, the password must be at least eight
alphanumeric characters in length. The username and password are not
case-sensitive. When a password is changed, a prompt will ask for the former
password. If none, press enter.
Default
No Password
Format
users passwd <
Mode
Global Config
no users passwd
U
This command sets the password of an existing operator to blank. When
a password is changed, a prompt will ask for the operator's former pass-
word. If none, press enter.
Format
no users passwd <
Mode
Global Config
CLI L2B
Release 4.0 11/07
4.6 User Account Management Commands
username>
username>
129