Sanyo SUPER BL P5 Manual page 48

3. SERVO SYSTEM CONFIGURATION
Connector List for PY2E (100 VAC input type)
Application
Single item
PY2E015 and
PY2E030 (without
RDY output) set
PY2E015 and
PY2E030
(with RDY output)
set
PY2A015
(built-in
Regenerative resistor)
PY2A030
(built-in
Regenerative resistor)
(without RDY output)
set
PY2A015
(built-in
Regenerative resistor)
PY2A030
(built-in
(with
Regenerative resistor)
RDY output) set
• Although a commercially available plug not listed in the above table may be used, it may
not engage with the amplifier properly depending on its shape.
• Consult with us when using a plug or housing whose engagement with the amplifier is not
confirmed.
• The power supply input connector CNA models differ depending on the input power
supply voltage type (200 VAC or 100 VAC input).
• CND connector (IC2.5/4-STF-5.08) is normally attached to Servo Amplifier having an
amplifier capacity of 50 A.
• CND connector (IC2.5/4-STF-5.08) is normally attached to 15A and 30A Servo Amplifier
with built-in regenerative resistor.
● Remote operator
Connected to the Servo Amplifier to set various parameters or check the internal status.
Model No.
AL-00329461-02
CN1 or CN2 plug
and housing
AL-00397841
CNA, CNB or CND
plug
CN1 or CN2 plug
AL-00397841
and housing
CNA, CNB, CNC or
AL-00329460-01
CND plug
AL-00329461-02
CN1 or CN2 plug
AL-00329458-01 and housing
CNA or CNB plug
AL-00292309
AL-00329461-02
CN1 or CN2 plug
AL-00329458-01
and housing
CNA, CNB or CNC
AL-00329460-01
plug
AL-00292309
Set contents
CNA plug Phoenix Contact MSTB2.5/4-STF-5.08
Sumitomo 3M
Phoenix Contact
Sumitomo 3M
Phoenix Contact
Sumitomo 3M
Phoenix Contact
Sumitomo 3M
Phoenix Contact
Model No.
RP-001
3－7
Maker Maker's model No.
10150-3000VE
10350-52A0-008
10120-3000VE
10320-52A0-008
MSTB2.5/4-STF-5.08
IC2.5/3-STF-5.08
IC2.5/4-STF-5.08