Sanyo SUPER BL P5 Manual page 5

CE Marking
At Sanyo Denki, we are executing tests on the "PY2" Servo Amplifier for compliance with the CE marking at
qualifying institutions. The CE mark is required to be attached all end products sold in EU countries.
Only products conforming to the safety standards are permitted to have them. Accordingly, customers are
requested to perform the final conformity test on their machines or systems incorporating our amplifiers.
The CE Marking Conformity Standards
We execute conformity tests for the following standards on the "PY2" Servo Amplifier at qualifying
institutions.
Classification of
directive
Low Voltage
Directive
EMC Directive
File numbers
Low Voltage Directive, Declaration :
Low Voltage Directive, Certification :
EMC Directive, Declaration
EMC Directive, Certification
UL Marking
The "PY2" series products are qualified to have the UL (U.S. version) and cUL (Canada version) marks of
the Underwriters Laboratories attached.
File Numbers
File No.: E179775 Power Conversion Equipment (CCN: NMMS, NMMS7)
Fuse
The "PY2" Servo Amplifiers are not equipped with fuses. Customers are requested to prepare a
UL-approved fast-blown fuse and install it in the input section of the main circuit power supply.
Classification
－
Terminal interference voltage
Emission
Electromagnetic radiation
interference
Radiation field immunity
Conductivity immunity
Electrostatic immunity
Immunity
Electrostatic immunity
Burst immunity
File No. C0002827C
File No. B 01 05 21206 040 (Messrs. TÜV PRODUCT SERVICE)
: File No. C0004056
: File No. E9 99 05 30982 005 (Messrs. TÜV PRODUCT SERVICE)
Test
EN50178
－
EN55011
EN55011
EN61000-4-3 / 1996
ENV50204 / 1995
EN61000-4-6 / 1996
EN61000-4-2
EN61000-4-2 : A1 / 1998
EN61000-4-2
EN61000-4-2 : A1 / 1998
EN61000-4-4 / 1995
i
Test standard