Sanyo SUPER BL P5 Manual page 136

7. EXPLANATION OF PARAMETERS
Abbre-
Mode Page
viation
1 12 SILM
13 THB
14 VCMS Velocity command scale
15 TCMS Torque command scale
Name and description
Sequence current limit value
• Sets a current limit value for holding brake
sequencing, overtravel or JOG operation.
• This setting is available within the range of
IP/IR × 100.
Holding brake excitation timing
• Sets the holding brake excitation timing.
• Select "0" when this function is not used.
• Sets a velocity command scale corresponding
to 1 V of the command voltage.
• Sets a torque command scale corresponding
to 1 V of the command voltage.
Standard
value
120
300
500
50
7－41
Setting
Unit Remarks
range
% 30 to
(IP/IR)
× 100
mSec 0 to Timing setting
1000 is available in
multiples of
4 msec.
-1
min / 0 to
V 3000
%/V 0 to
400