Sanyo SUPER BL P5 Manual page 139

7. EXPLANATION OF PARAMETERS
Abbre-
Mode Page
viation
2 0 PMOD Position command pulse train form
The minimum pulse width values shown at bit 0/1 of the digital filter are for both "H" and
"L" pulses.
Name and description
0 and 1 of bit7 specify setting of the digital filter used for the position command pulse train
input.
The following describes the digital filter setting corresponding to each input pulse form.
① Backward pulse train + Forward pulse train
PMOD 7 6 5 4
bit6 bit5
Switching of digital filter
Standard
3 2 1 0
bit bit Digital filter for command pulse input
1 0
0 0
0 1
1 0
1 1
bit bit Digital filter for command pulse input
1 0
0 0
0 1
1 0
1 1
Command pulse form
0 0 Backward pulse train + Forward pulse
0 High speed
1 Low speed (1/4)
7－44
Setting
Unit
value range
When bit7 = 0
Minimum pulse width
0.8 µs
0.2 µs
0.4 µs
1.6 µs
When bit7 = 1
Minimum pulse width
3.2 µs
0.8 µs
1.6 µs
6.4 µs
Remarks