Unattended Call Transfer - Panasonic KX-UT248 Manual

Once [HOLD] has been pressed you cannot continue the conference call.
3. To switch between the two parties (toggle), please press the respective function keys on the right
side of your Panasonic telephone indicating the lines in use (these can only be function keys, which
have not yet been programmed). The function key flashes green when the party is placed on "hold".
A steady green light indicates you are in an active call.
4. To end one of the calls, simply hang up while the call with this party is active.
5. The party is now disconnected.
6. Press the flashing green function key on the right side of the telephone. You can now continue the
conversation with party 2.
1.9. Attended call transfer
1. During an active call press the key.
2. Now dial the party to whom you would like to transfer the call.
To do so, enter the party's telephone number and press [ENTER] to confirm.
3. Wait for the other party to answer, then announce the call. If necessary, this step can also be
omitted.
4. Press the softkey .

1.10. Unattended call transfer

During an active call press the BTrf softkey.
Now dial the party to which you would like to transfer the call.
To do so, enter the party's telephone number and press [ENTER] to confirm.
Hang up the receiver.
7