Call Forwarding — To Co Line - Panasonic KX-TD1232AL User Manual Addendum

A
Account Code Entry
An Account Code is used to identify incoming and outgoing outside calls, for accounting
and billing purposes. The account code is appended to the "Station Message Detail
Recording (SMDR)" call record. For incoming outside calls, account codes are not required.
For outgoing outside calls, account codes are often required. You can enter account codes in
the following three modes: Verified - All Calls mode; Verified - Toll Restriction Override
mode; and Option mode. One mode is selected for each extension on a "Class of Service*"
basis.
Entering account codes
1
2
3
account code and #
4
line access code
Conditions
In "Verified - All Calls" mode
• You must always enter a pre-assigned account code when making any of the following calls
unless it has previously been stored in memory:
a) Call Forwarding — to CO Line
b) Manual Dialing (Selecting a CO line)
c) Pickup Dialing (Hot Line)
d) Redial, Last Number
e) Station Speed Dialing
f) System Speed Dialing
In "Verified - Toll Restriction Override" mode
• You can enter a pre-assigned account code only when you need to override toll restriction
(Toll Restriction Override by Account Code Entry).
104
6.2 SLT and ISDN Telephone Features
1. Lift the handset.
2. Dial the feature number (49).
• No tone is returned.
3. Dial the account code and #.
• You may dial 99 instead of "#."
• You hear a confirmation tone and then a dial tone.
4. Dial the line access code (9 or 81 through 88) and dial.