Table of Contents
Advertisement
Installing the expansion bracket
You can install the expansion bracket.
Expansion bracket
Figure 29. Installing the expansion bracket
To install the expansion bracket, complete the following steps:
1. Place the expansion bracket in position on the system board.
2. Secure the bracket to the system board with two screws from the option kit or
from the removed drive tray.
3. Install and close the blade server cover. See "Installing and closing the blade
server cover" on page 245.
Statement 21
CAUTION:
Hazardous energy is present when the blade server is connected to the power
source. Always replace the blade server cover before installing the blade
server.
4. Install the blade server into the BladeCenter unit. See "Installing the blade
server in a BladeCenter unit" on page 242.
Chapter 4. Removing and replacing blade server components
273
Advertisement
Table of Contents
