Table of Contents
Advertisement
3. Carefully lay the blade server on a flat, static-protective surface, with the cover
side up.
4. Press the blade-cover release on each side of the blade server and lift the cover
open.
5. Lay the cover flat, or lift it from the blade server and store it for future use.
Statement 21
CAUTION:
Hazardous energy is present when the blade server is connected to the power
source. Always replace the blade server cover before installing the blade
server.
Installing and closing the blade server cover
Install and close the cover of the blade server before you insert the blade server
into the BladeCenter unit. Do not attempt to override this important protection.
Blade-cover
release
Figure 9. Installing the cover
Statement 21
CAUTION:
Hazardous energy is present when the blade server is connected to the power
source. Always replace the blade server cover before installing the blade server.
Perform the following procedure to replace and close the blade server cover.
Cover
pins
Blade-cover
release
Chapter 4. Removing and replacing blade server components
245
Advertisement
Table of Contents
