IBM BladeCenter JS12 Problem Determination And Service Manual page 69

Ibm power6 architecture
Table of Contents

Advertisement

Table 14. BA000010 to BA400002 Partition firmware SRCs (continued)
v Follow the suggested actions in the order in which they are listed in the Action column until the problem is
solved. If an action solves the problem, then you can stop performing the remaining actions.
v See Chapter 3, "Parts listing, Type 7998," on page 235 to determine which components are CRUs and which
components are FRUs.
Error code
BA010011
BA010013
BA010014
BA010015
BA010020
BA012010
BA012011
Description
SET-ROOT-PROP could not find / (root)
package
The information in the error log entry
for this SRC provides network trace
data.
The information in the error log entry
for this SRC provides network trace
data.
The information in the error log entry
for this SRC provides network trace
data.
A trace entry addition failed because of
a bad trace type.
Opening the TCP node failed.
TCP failed to read from the network
Action
1. Reboot the blade server.
2. If the problem persists:
a. Go to "Checkout procedure" on page
186.
b. Replace the system-board and chassis
assembly, as described in "Replacing the
Tier 2 system-board and chassis
assembly" on page 274.
Informational message. No action is required.
Informational message. No action is required.
Informational message. No action is required.
1. Reboot the blade server.
2. If the problem persists:
a. Go to "Checkout procedure" on page
186.
b. Replace the system-board and chassis
assembly, as described in "Replacing the
Tier 2 system-board and chassis
assembly" on page 274.
1. Reboot the blade server.
2. If the problem persists:
a. Go to "Checkout procedure" on page
186.
b. Replace the system-board and chassis
assembly, as described in "Replacing the
Tier 2 system-board and chassis
assembly" on page 274.
1. Reboot the blade server.
2. If the problem persists:
a. Go to "Checkout procedure" on page
186.
b. Replace the system-board and chassis
assembly, as described in "Replacing the
Tier 2 system-board and chassis
assembly" on page 274.
Chapter 2. Diagnostics
55

Advertisement

Table of Contents
loading

Table of Contents