IBM BladeCenter JS12 Problem Determination And Service Manual page 170

Table 23. 101-711 through FFC-725 SRNs (continued)
SRN FFC
256D-702 256D 221
25A0–xxx 2631
25C4–xxx 25C4
25C4-201 25C4
25C4-701 25C4
25C4-601 25C4
25C4-602 25C4
2604-xxx 2604
2604-102 2604
2604-103 2604
2604-104 2604
2604-105 2604
2604-106 2604
2604-108 2604 221
2604-110 2604
2604-201 2604 221
2604-203 2604
2604-204 2604 221
2604-205 2604 221
2604-701 2604
2604-703 2604
2604-704 2604
156
JS12 Type 7998: Problem Determination and Service Guide
Description and Action
Error Log Analysis indicates permanent adapter failure is reported on the other port
of this adapter.
1. Check the BladeCenter management-module event log. If an error was recorded
by the system, see "POST progress codes (checkpoints)" on page 88.
2. Replace any parts reported by the diagnostic program.
3. Replace the system-board and chassis assembly.
Configuring I/O planar control logic for IDE bus devices. Go to "Performing the
checkout procedure" on page 187.
Generic reference for Broadcom adapter. Go to "Performing the checkout procedure"
on page 187.
Configuration error. Go to "Performing the checkout procedure" on page 187.
Permanent adapter failure. Go to "Performing the checkout procedure" on page 187.
Download firmware error. Go to "Performing the checkout procedure" on page 187.
EEPROM read error. Go to "Performing the checkout procedure" on page 187.
Generic reference for 4Gb Fibre Channel PCI-X Adapter card. Go to "Performing the
checkout procedure" on page 187.
Reset Test failure for the Fibre Channel adapter card. Replace the 4Gb Fibre Channel
PCI-X Adapter card.
Register Test failure for the Fibre Channel adapter card. Replace the 4Gb Fibre
Channel PCI-X Adapter card.
SRAM Test failure for the Fibre Channel adapter card. Replace the 4Gb Fibre
Channel PCI-X Adapter card.
Internal Wrap Test failure for the Fibre Channel adapter card. Replace the 4Gb Fibre
Channel PCI-X Adapter card.
Gigabit Link Module (GLM) Wrap Test failure for the Fibre Channel adapter card.
Replace the 4Gb Fibre Channel PCI-X Adapter card.
Enhanced Error Handling Failure on the bus for the Fibre Channel adapter card. Go
to "Performing the checkout procedure" on page 187.
Enhanced Error Handling Failure on the Fibre Channel adapter card. Replace the
4Gb Fibre Channel PCI-X Adapter card.
Configuration Register Test Failure for the Fibre Channel adapter card. Go to
"Performing the checkout procedure" on page 187.
PCI Wrap Test Failure for the Fibre Channel adapter card. Replace the 4Gb Fibre
Channel PCI-X Adapter card.
DMA Test Failure for the Fibre Channel adapter card. Go to "Performing the
checkout procedure" on page 187.
Error on Read/Write Operation for the Fibre Channel adapter card. Go to
"Performing the checkout procedure" on page 187.
Error Log Analysis indicates that the adapter self-test failed for the Fibre Channel
adapter card. Go to "Performing the checkout procedure" on page 187.
Error Log Analysis indicates that an unknown adapter error has occurred for the
Fibre Channel adapter card. Go to "Performing the checkout procedure" on page
187.
Error Log Analysis indicates that an adapter error has occurred for the Fibre Channel
adapter card. Go to "Performing the checkout procedure" on page 187.