IBM BladeCenter JS12 Problem Determination And Service Manual page 120

Ibm power6 architecture
Table of Contents

Advertisement

Table 17. C2001000 to C20082FF checkpoints (continued)
v If the system hangs on a progress code, follow the suggested actions in the order in which they are listed in
the Action column until the problem is solved. If an action solves the problem, you can stop performing the
remaining actions.
v See Chapter 3, "Parts listing, Type 7998," on page 235 to determine which components are CRUs and which
components are FRUs.
Progress code
C2006010
C2006020
C2006030
C2006040
C2006050
C2006060
C2006100
106
JS12 Type 7998: Problem Determination and Service Guide
Description
Locating next LID information on the
load source
Verifying LID information
Priming LP configuration LID
Preparing to initiate LID load from load
source
LP configuration LID primed
successfully
Waiting for LID load to complete
LID load completed successfully
Action
1. Go to "Recovering the system firmware" on
page 222.
2. Replace the system-board and chassis
assembly, as described in "Replacing the
Tier 2 system-board and chassis assembly"
on page 274.
1. Go to "Recovering the system firmware" on
page 222.
2. Replace the system-board and chassis
assembly, as described in "Replacing the
Tier 2 system-board and chassis assembly"
on page 274.
1. Go to "Recovering the system firmware" on
page 222.
2. Replace the system-board and chassis
assembly, as described in "Replacing the
Tier 2 system-board and chassis assembly"
on page 274.
1. Go to "Recovering the system firmware" on
page 222.
2. Replace the system-board and chassis
assembly, as described in "Replacing the
Tier 2 system-board and chassis assembly"
on page 274.
1. Go to "Recovering the system firmware" on
page 222.
2. Replace the system-board and chassis
assembly, as described in "Replacing the
Tier 2 system-board and chassis assembly"
on page 274.
1. Go to "Recovering the system firmware" on
page 222.
2. Replace the system-board and chassis
assembly, as described in "Replacing the
Tier 2 system-board and chassis assembly"
on page 274.
1. Go to "Recovering the system firmware" on
page 222.
2. Replace the system-board and chassis
assembly, as described in "Replacing the
Tier 2 system-board and chassis assembly"
on page 274.

Advertisement

Table of Contents
loading

Table of Contents