Table of Contents
Advertisement
Installing the hard disk drive tray
You can install the hard disk drive tray.
Figure 27. Installing the hard disk drive tray
To install the hard disk drive tray, complete the following steps:
1. Place the drive tray into position on the system board and install the four
screws to secure it.
2. Install the hard disk drive that was removed from the drive tray. See "Installing
a SAS hard disk drive" on page 249 for instructions.
3. Install and close the blade server cover. See "Installing and closing the blade
server cover" on page 245.
Statement 21
CAUTION:
Hazardous energy is present when the blade server is connected to the power
source. Always replace the blade server cover before installing the blade
server.
Hard disk drive tray
Chapter 4. Removing and replacing blade server components
271
Advertisement
Table of Contents
