A00-Ff0 Through A24-Xxx Srns - IBM BladeCenter JS12 Problem Determination And Service Manual

Ibm power6 architecture
Table of Contents

Advertisement

Table 23. 101-711 through FFC-725 SRNs (continued)
SRN
FFC
2640-114
2640
2640-115
2640 2631
2640-121
2640
2640-131
2640
2640-132
2640
2640-133
2640
2640-134
2640
2640-135
2640
2640-136
2640 2631
2D02–xxx
2631
FFC-724
FFC
FFC-725
FFC

A00-FF0 through A24-xxx SRNs

AIX might generate service request numbers (SRNs) from A00-FF0 to A24-xxx.
Description and Action
IDE disk diagnostic failure. Go to "Performing the checkout procedure" on page 187.
IDE disk error on open or configuring device system-board and chassis assembly -
IDE controller. Go to "Performing the checkout procedure" on page 187.
Physical volume hardware error. Go to "Performing the checkout procedure" on
page 187.
Smart status threshold exceeded. Go to "Performing the checkout procedure" on
page 187.
Command timeouts threshold exceeded. Go to "Performing the checkout procedure"
on page 187.
Command timeout with error condition. Go to "Performing the checkout procedure"
on page 187.
Hardware command or DMA failure. Go to "Performing the checkout procedure" on
page 187.
IDE DMA error with no error status. Go to "Performing the checkout procedure" on
page 187.
Timeout waiting for controller or drive with no busy status. Go to "Performing the
checkout procedure" on page 187.
Generic reference for USB controller/adapter - system-board and chassis assembly.
Go to "Performing the checkout procedure" on page 187.
Temporary device bus interface problem.
1. Check the BladeCenter management-module event log. If an error was recorded
by the system, see "POST progress codes (checkpoints)" on page 88.
2. Replace any parts reported by the diagnostic program.
3. Go to "Performing the checkout procedure" on page 187.
Temporary device bus interface problem.
1. Check the BladeCenter management-module event log. If an error was recorded
by the system, see "POST progress codes (checkpoints)" on page 88.
2. Replace any parts reported by the diagnostic program.
3. Go to "Performing the checkout procedure" on page 187.
159
Chapter 2. Diagnostics

Advertisement

Table of Contents
loading

Table of Contents