Table of Contents
Advertisement
Table 14. BA000010 to BA400002 Partition firmware SRCs (continued)
v Follow the suggested actions in the order in which they are listed in the Action column until the problem is
solved. If an action solves the problem, then you can stop performing the remaining actions.
v See Chapter 3, "Parts listing, Type 7998," on page 235 to determine which components are CRUs and which
components are FRUs.
Error code
BA220010
BA220020
BA278001
BA278002
BA278003
BA278004
BA278005
BA278006
BA278007
BA278009
82
JS12 Type 7998: Problem Determination and Service Guide
Description
There was a partition firmware error
during a USB hotplug probing. USB
hotplug may not work properly on this
partition.
CRQ registration error; partner vslot
may not be valid
Failed to flash firmware: invalid image
file
Flash file is not designed for this
platform
Unable to lock the firmware update lid
manager
An invalid firmware update lid was
requested
Failed to flash a firmware update lid
Unable to unlock the firmware update
lid manager
Failed to reboot the system after a
firmware flash update
The operating system's server firmware
update management tools are
incompatible with this system.
Action
1. Look for EEH-related errors in the event
log.
2. Resolve any EEH event log entries that are
found.
3. Correct any errors that are found and
reboot the blade server.
4. If the problem persists:
a. Go to "Checkout procedure" on page
186.
b. Replace the system-board and chassis
assembly, as described in "Replacing the
Tier 2 system-board and chassis
assembly" on page 274.
Verify that this client virtual slot device has a
valid server virtual slot device in a hosting
partition.
Download a new firmware update image and
retry the update.
Download a new firmware update image and
retry the update.
1. Restart the blade server.
2. Verify that the operating system is
authorized to update the firmware. If the
system is running multiple partitions, verify
that this partition has service authority.
Download a new firmware update image and
retry the update.
Download a new firmware update image and
retry the update.
Restart the blade server.
Restart the blade server.
Go to the IBM download site at
www14.software.ibm.com/webapp/set2/sas/
f/lopdiags/home.html to download the latest
version of the service aids package for Linux.
Advertisement
Table of Contents
