Repeater List; D Repeater List Contents - Icom ID-4100A Advanced Manual

Previous view
4
D-STAR OPERATION

Repeater list

You can save repeater information for quick and
simple communication in up to 1500 repeater memory
channels (Repeater list) in up to 50 Groups.
Entering data into the repeater list is required to use
the DR function.
You can enter four types of frequencies into the
repeater list, as shown below:
• DV repeater
• DV simplex
• FM repeater
• FM simplex
TIP:
• For easy operation, the repeater list is preloaded
into your transceiver. However, if you do an All
Reset, the CPU clears all the setting data, the
memory channels, and the repeater list. We
recommend that you back up the memory data to
a microSD card or save it to a PC using the CS-
4100 cloning software.
• The repeater list can be downloaded from the Icom
website.
http://www.icom.co.jp/world/support/download/firm/
index.html

D Repeater list contents

The following contents are included in the repeater
list:
• TYPE:
• NAME:
• SUB NAME:
• CALL SIGN:
• GW CALL SIGN:
• GROUP:
• USE(FROM):
• FREQUENCY:
• DUP:
• OFFSET FREQ:
• MODE:
• TONE:
• REPEATER TONE: Repeater tone (p. 4-35)
• POSITION:
• LATITUDE:
• LONGITUDE:
• UTC OFFSET:
Example: "Hamacho" repeater information
4-32
Frequency type (p. 4-34)
Repeater name (p. 4-34)
Repeater sub name (p. 4-34)
Repeater call sign and port letter
(p. 4-34)
Gateway repeater's call sign and
port "G" (p. 4-34)
Repeater group (p. 4-35)
Access repeater use (p. 4-35)
Access repeater's frequency
(p. 4-35)
Duplex direction (p. 4-35)
Frequency offset (p. 4-35)
Operating mode (p. 4-35)
Tone setting (p. 4-35)
Position data accuracy level
(p. 4-36)
Latitude of the repeater (p. 4-36)
Longitude of the repeater
(p. 4-36)
UTC Offset (p. 4-36)