Adding The Repeater Information Using The Rx History - Icom ID-4100A Advanced Manual

Previous view
4
D-STAR OPERATION

Adding the Repeater information using the RX History

This section describes how to add new repeater
information to the repeater list using the RX history.
1. Push [QUICK].
2. Rotate [DIAL] to select "RX History," then push
[ï].
• Displays the RX HISTORY screen.
3. Rotate [DIAL] to display the repeater you want to
add to the repeater list, then push [ï].
• Displays the RX history detail screen.
4. Rotate [DIAL] to display "RXRPT1" and
"RXRPT2."
5. Push [QUICK].
6. Select "Add To RPT List," then push [ï].
7. Select the repeater call sign that you want to add
to the repeater list, then push [ï].
• Displays the REPEATER LIST EDIT screen. The
selected repeater call sign is automatically entered.
L See pages 4-34 ~ 4-36 to edit the contents.
8. Select "<<Add Write>>," then push [ï].
• The confirmation dialog "Add Write?" is displayed.
9. Select <YES>, then push [ï].
• The repeater contents are added to the repeater list,
and the display returns to the RX HISTORY screen.
TIP: How to select the display type
The RX HISTORY screen has two display types,
Name Display and Call Sign Display.
(Default: Name Display)
1. On the RX HISTORY screen, push [QUICK].
2. Select "Name Display" or "Call Sign Display,"
then push [ï].
L Even if "Name Display" is selected, the call sign is
displayed when a name is not entered in the DV
memory.
4-39