Entering A Memory Name - Icom ID-4100A Advanced Manual

Previous view
1
MEMORY OPERATION
Entering a Memory or Bank name
You can enter an alphanumeric name for each
Memory, including Call channels, and Banks.
Names can be a maximum of 16 characters.
D Entering a Memory name
Manage Memory > Memory CH
1. Push [MENU].
2. Rotate [DIAL] to select "Manage Memory," then
push [ï].
• Displays the MANAGE MEMORY screen.
L You can display the MANAGE MEMORY screen by
pushing [MW] on other than the DR screen.
3. Select "Memory CH," then push [ï].
4. Select "ALL," then push [ï].
• Displays the ALL screen.
5. Rotate [DIAL] to select the Memory channel to
enter a name, then push [QUICK].
6. Select "Edit," then push [ï].
7. Select "NAME," then push [ï].
• Enters the name entry mode.
8. Enter a name of up to 16 characters.
(Example: Calling)
Selectable characters and symbols
A to Z, a to z, 0 to 9, ! " # $ % & ' ( ) * +
, - . / : ; < = > ? @ [ \ ] ^ _ ` { | } ˜ (space)
L See "Entering and editing text" for details. (p. iv)
9. After entering, push [ï].
10. Select "<<Overwrite>>," then push [ï].
• The confirmation dialog "Overwrite?" is displayed.
11. Select <YES>, then push [ï].
• Beeps sound, and writes the entered name to the
channel.
[MENU]
[ ] [DIAL]
1-10
[QUICK]