Individual Skip Setting; Group Skip Setting - Icom ID-4100A Advanced Manual

Previous view
4
D-STAR OPERATION
Skip setting for the DR scan
You can set repeaters as scan skip repeaters. The
selected repeaters are skipped for faster scanning.
You can set the skip setting to all repeaters in the
selected repeater group, or to individual repeaters.
L When a repeater is specified as a skip repeater, its
"USE (FROM)" setting is automatically set to "NO."
In that case, the repeater cannot be selected in
"FROM" field (Access repeater).
D Individual skip setting
DV Memory > Repeater List
1. Push [MENU].
2. Rotate [DIAL] to select "DV Memory," then push
[ï].
3. Select "Repeater List," then push [ï].
4. Select a repeater group where the repeater you
set the skip setting is listed, then push [ï].
(Example: 11: Japan)
• Displays the repeater list of the selected repeater
group.
5. Select the repeater to be skipped, then push
[QUICK].
6. Select "SKIP," then push [ï].
• Displays "SKIP" on the selected repeater's information
window.
L Select "SKIP" again to cancel the skip setting.
L Select "SKIP All ON" to set the skip setting to all
repeaters in the group.
D Group skip setting
1. On the REPEATER GROUP screen, select a
repeater group, as described above.
2. Push [QUICK], then select "SKIP All ON" to skip
the repeaters in the group during the DR scan.
TIP:
• When you select "Repeater List" on the FROM
SELECT screen, you can set the skip setting as
described to the left.
• When "FROM" is selected, push [QUICK] to set
the skip setting, as shown below.
L Displays "SKIP" in the "FROM" field.
4-40