Vox Function; D Using The Vox Function; D Setting The Vox Level - Icom ID-4100A Advanced Manual

Previous view
12
Bluetooth ® OPERATION

VOX function

The Voice Operated eXchange (VOX) function toggles
the transceiver between transmit and receive by your
voice. This function provides hands-free operation.
You can use the VOX function with the optional VS-3
or a third party's Bluetooth headset.
Depending on the headset, the VOX function may be
disabled because of the differences in microphones.

D Using the VOX function

Bluetooth Set > Headset Set > VOX > VOX
1. Push [MENU].
2. Rotate [DIAL] to select "Bluetooth Set," then push
[ï].
3. Select "Headset Set," then push [ï].
4. Select "VOX," then push [ï].
5. Select "VOX," then push [ï].
6. Select "ON," then push [ï].
7. Push [MENU].
• Returns to the standby screen.
• Displays "V."
NOTE: While receiving a signal or sounding a beep,
the transceiver does not switch to transmit by your
voice.
If the transceiver does not connect to a Bluetooth
headset, you cannot use the VOX function, even if
the "VOX" item is set to ON.
Be sure to check the Bluetooth connection between
the transceiver and the headset before using the
VOX function.

D Setting the VOX level

Bluetooth Set > Headset Set > VOX > VOX Level
1. Push [MENU].
2. Rotate [DIAL] to select "Bluetooth Set," then push
[ï].
3. Select "Headset Set," then push [ï].
4. Select "VOX," then push [ï].
5. Select "VOX Level," then push [ï].
6. While speaking into the headset microphone,
rotate [DIAL] to adjust the VOX level.
• Displays "VOX" when the TX level audio is input.
L The VOX level can be adjusted between 1
(minimum) and 10 (maximum), or turned OFF.
(Default: 5)
L Higher values make the VOX function more sensitive
to your voice.
7. Push [MENU].
• Returns to the standby screen.
Information
L
• If the S-meter does not display the output power level,
and the transceiver does not transmit, adjust the VOX
delay time in the Menu screen.
(Bluetooth Set > Headset Set > VOX > VOX Delay)
• When the VOX function is ON, you can adjust the
VOX level by pushing [+] or [–] on the VS-3 while
transmitting.
• When the VOX function is ON, you can adjust the
VOX level by rotating [DIAL] while transmitting.
NOTE: We recommend that you set the microphone
gain on the MENU screen or the headset, before
setting the VOX level.
(Function > MIC Gain)
12-4