Time Set Items; Dv Gateway Items - Icom ID-4100A Advanced Manual

Previous view
9
MENU SCREEN

Time Set items

DATE
Time Set > Date/Time > DATE
Manually set the date to between 2000/01/01 and
2099/12/31.
TIME
Time Set > Date/Time > TIME
Manually set the time that is displayed at the top of
the screen to between 0:00 and 23:59. The time is
displayed in the 24 hour format.
L When "GPS Time Correct" is set to "Auto," the GPS
receiver automatically sets the time by calculating
the received Universal Time of Coordinated (UTC)
time and the "UTC Offset" setting. (p. 9-67)
GPS Time Correct
Time Set > GPS Time Correct
This function corrects the time by using the time
information that a GPS sentence contains.
It is corrected by calculating the received UTC time
and the "UTC Offset" setting.
• OFF: Does not correct the time.
• Auto: Automatically corrects the time.
UTC Offset
Time Set > UTC Offset
Set the time difference between UTC time and the
local time to between –14:00 and +14:00 in 00:05
steps.
Auto Power OFF
Time Set > Auto Power OFF
Select whether or not to automatically turn OFF the
transceiver after inactivity for this set period of time.
• OFF: Does not turn OFF the transceiver.
• 30/60/90/120min: Turns OFF the transceiver after
inactivity for this set period of time.
L "AUTO POWER OFF" is displayed and beeps
sound 5 seconds before turning OFF the
transceiver. If you operate the transceiver during
this period of time, the Auto Power OFF timer is
reset.

DV Gateway items

Enters the Terminal mode or Access Point mode.
See "About the DV Gateway function" for details.
L "About the DV Gateway function" can be
<<Terminal Mode>>
DV Gateway > <<Terminal Mode>>
The Terminal mode enables you to make a direct
Gateway call through the Internet using the optional
OPC-2350LU and a Windows PC or Android device.
In the Terminal mode, "<<Normal Mode>>" is
displayed on the DV GATEWAY screen. To cancel the
Terminal mode, push [ï].
L You can cancel the Terminal mode in the Quick
<<Access Point Mode>>
(Default: Auto)
DV Gateway > <<Access Point Mode>>
The Access Point mode enables the D-STAR
transceiver to make a Gateway call through an
ID-4100A/E using the optional OPC-2350LU to a
Windows PC or Android device.
In the Access Point mode, "<<Normal Mode>>" is
displayed in the DV GATEWAY screen. To cancel the
Access Point mode, push [ï].
L You can cancel the Access Point mode in the Quick
(Default: ±0:00)
(Default: OFF)
9-67
downloaded from the Icom website.
Menu window.
Menu window.