Icom ID-4100A Advanced Manual page 150

Previous view
9
MENU SCREEN
Menu items and Default settings (Continued)
NOTE: The default settings shown in bold letters below are for the USA version.
The default settings may differ, depending on your transceiver version.
GPS Alarm
Alarm Select
Alarm Area (Group)
Alarm Area (RX/Memory)
GPS Logger* 2
GPS Logger
Record Interval
Record Sentence
GPS Auto TX
Call Sign
UR: CQCQCQ, R1: --------,
R2: --------, MY: --------
RX History
RX01:
DV Memory
Your Call Sign
Repeater List
NOTE: The repeater list described in this manual may differ from your preloaded list.
My Station
My Call Sign
TX Message
DV Set
Tone Control
RX Bass
RX Treble
RX Bass Boost
* 1 The unit may differ, depending on the "Display Unit" settings. (p. 9-64)
* 2 Be sure to insert the microSD card into the transceiver before selecting these items.
OFF, RX, Group, or Memory
0.08' ~ 0.25' ~ 59.99'* 1
Limited, Extended, or Both
OFF or ON
1sec, 5sec, 10sec, 30sec, or
60sec
✔ RMC/ ✔ GGA/ ✔ VTG/ ✔ GSA
OFF, 5sec, 10sec, 30sec, 1min,
3min, 5min, 10min, or 30min
Set and display the DV mode call signs.
Displays the received call history in the DV mode.
Saves call signs or repeater information to use in the DV mode.
Blank
01:~50:
Sets and saves MY call sign to use in the DV mode.
1:~6:
1:~5: or OFF
Sets values for the DV mode operations.
Cut, Normal, or Boost
Cut, Normal, or Boost
OFF or ON
9-7
Select the target for the GPS alarm function.
Enter the GPS alarm active range.
Select the GPS alarm active range.
Turns the GPS Logger function ON or OFF, to
save your route as you move.
Selects the GPS Logger function record
interval.
Selects the GPS Logger function record
sentences.
Selects a time option for the GPS automatic
transmission function.
Displays the operating call signs.
Sets the operating call signs according to the
type of call you want to make.
Displays the calls your transceiver received.
Saves station call signs. Add or edit call signs.
Saves repeater information.
Add or edit a repeater information.
Saves MY call signs.
Select or edit a MY call sign to use in the DV
mode.
Saves TX Messages.
Select or edit TX Message to use in the DV
mode.
Sets the DV mode received audio bass filter
level to Cut, Normal or Boost.
Sets the DV mode received audio treble filter
level to Cut, Normal or Boost.
Turns the DV mode received audio Bass
Boost function ON or OFF