D Directly Entering (Ur) - Icom ID-4100A Advanced Manual

Previous view
4
D-STAR OPERATION
"TO" (Destination) setting (Continued)
D Using the TX History
The TX History saves the name and/or call sign of up
to 20 "TO" (Destination) settings that were used when
you made the calls.
NOTE: Until you make a call in the DV mode, you
cannot select "TO" (destination) from the TX History.
Example: Selecting the "Hamacho" repeater in the TX
History.
1. Hold down [DR] for 1 second to display the DR
screen.
2. Select "TO," then push [ï].
• Displays the TO SELECT screen.
L On the DR screen, pushing [DR] toggles between
"FROM" and "TO."
3. Select "TX History," then push [ï].
• Displays the TX HISTORY screen.
4. Select the destination name or call sign, then
push [ï]. (Example: "Hamacho")
• Returns to the DR screen, and "Hamacho" is displayed
in "TO."
TIP: You can add the TX HISTORY data to memory,
or delete it from the TX HISTORY screen, push
[QUICK], then select the option.

D Directly entering (UR)

The destination station call sign can be directly
entered.
Example: Directly entering the call sign "JM1ZLK."
1. Hold down [DR] for 1 second to display the DR
screen.
2. Select "TO," then push [ï].
• Displays the TO SELECT screen.
L On the DR screen, pushing [DR] toggles between
3. Select "Direct Input (UR)," then push [ï].
• Displays the DIRECT INPUT (UR) screen.
4. Enter a call sign of up to 8 characters, including
spaces.
L See "Entering and editing text" for details. (p. iv)
5. After entering, push [ï].
• Returns to the DR screen, and "JM1ZLK" is displayed
The Sub
in "TO."
name is
L After entry, you can correct the call sign in the
displayed.
L The entered call sign remains on the DIRECT INPUT
TIP: If the entered call sign is duplicated in "Your
Call Sign" memory, the name is displayed. (Only
when the name has been entered.)
4-11
"FROM" and "TO."
DIRECT INPUT (UR) screen.
(UR) screen, until you enter a new call sign.