Assigning A Memory Channel To A Memory Bank - Icom ID-4100A Advanced Manual

Previous view
1
MEMORY OPERATION
Memory bank setting
The transceiver has a total of 26 banks (A ~ Z).
Regular memory channels 0 ~ 999 can be assigned
to any bank for easy memory management. Up to 100
channels can be assigned to a bank.
NOTE: The memory banks are only used to hold
memory channels. Therefore, if the original memory
channel content have been changed, the memory
bank content are also changed at the same time.
D Assigning a memory channel to a memory bank
Example: Assigning Memory channel "000" to the
bank "A".
Manage Memory > Memory CH
1. Push [MENU].
2. Rotate [DIAL] to select "Manage Memory," then
push [ï].
• Displays the MANAGE MEMORY screen.
L You can display the MANAGE MEMORY screen by
pushing [MW] on other than the DR screen.
3. Select "Memory CH," then push [ï].
4. Select "ALL," then push [ï].
• Displays the ALL screen.
5. Rotate [DIAL] to select the Memory channel to be
assigned to a bank, then push [QUICK].
6. Select "Edit," then push [ï].
7. Select "BANK," then push [ï].
8. Select a bank to be assigned, then push [ï].
9. Select "<<Overwrite>>," then push [ï].
• The confirmation dialog "Overwrite?" is displayed.
10. Select <YES>, then push [ï].
• Beeps sound, and assigns the selected memory
channel to the bank.
[MENU]
[ ] [DIAL]
1-8
[QUICK]