Icom ID-4100A Advanced Manual page 27

Previous view
2
SCAN OPERATION
Setting and clearing the skip channel
You can set or clear a Skip channel setting.
The channels that are set as a Skip channel are
skipped during a scan.
1. Push [V/M] several times until you enter the
Memory mode.
2. Rotate [DIAL] to select the Memory channel.
3. Push [QUICK].
4. Rotate [DIAL] to select "SKIP," then push [ï].
5. Select the option, then push [ï].
• OFF: Cancel the skip setting.
• SKIP: Skipped during a memory scan.
• PSKIP: Skipped during both VFO and memory
scans.
• When a Skip channel is set, "SKIP" or "PSKIP" is
displayed.
TIP: To clear the skip channel setting
To clear the skip channel setting, select "OFF" in
step 5, then push [ï].
[ ]
[V/M]
[DIAL]
[QUICK]
2-8