D Recording An Auto Reply Message - Icom ID-4100A Advanced Manual

Previous view
4
D-STAR OPERATION
Automatic Reply function (Continued)

D Recording an Auto Reply message

You can record the Auto Reply message and saved on
a microSD card to reply to the call with your voice.
TIP: Be sure a microSD card is in the card slot.
Voice Memo > DV Auto Reply
1. Push [MENU].
2. Rotate [DIAL] to select "Voice Memo," then push
[ï].
3. Select "DV Auto Reply," then push [ï].
4. Push [MW].
• Starts recording.
L Maximum record time is 10 second
L Hold the microphone 5 to 10 cm (2 to 4 inches) from
your mouth, then speak at a normal voice level.
L Only one message can be recorded. The current
contents will be overwritten if you record again.
5. Push [MENU].
• Returns to the standby screen.
TIP:
• To delete the recorded message, push [QUICK] on
the DV AUTO REPLY screen, then select "Clear."
• To record message with the optional VS-3
, push [V/M] on the DV AUTO
Bluetooth
headset
REPLY screen, then select "Bluetooth MIC."
DV AUTO REPLY screen operation
[MENU]
Returns to the standby screen
[ ]
Sets
[ ]
Returns to the
VOICE MEMO
screen
[V/M]
Selects the
microphone
[MODE]
Adjusts the
microphone gain
• Push [MONI] to stop recording.
• Push [RX→CS] to start the playback.
• Push [MODE] to display the microphone gain
adjustment bar.
Audio level
is displayed
4-25 4-25
[QUICK]
Clears the
recorded message
[MONI]
Stops recording
[RX→CS]
Starts the playback
[MW]
Starts recording
Adjust the Mic gain so
that the REC Level does
not reach to this range