Related Manuals for Icom IDAS IC-F3210D
Summary of Contents for Icom IDAS IC-F3210D
- Page 1 OPERATING GUIDE OPERATING GUIDE FOR IC-F3210D/F4210D/F3230D/ F4230D/F5220D/F6220D SERIES IDAS™ NXDN™ OPERATION...
-
Page 2: Table Of Contents
Site Select function (Multi-site Trunking mode only) ..29 ■ Icom, Icom Inc. and the Icom logo are registered trademarks of Icom Incor- porated (Japan) in Japan, the United States, the United Kingdom, Germany, France, Spain, Russia and/or other countries. IDAS and IDAS logo are trademarks of Icom Incorporated (Japan). -
Page 3: Preparation
IC-F3210D/F4210D series transceivers: [Upper] and [Lower] IC-F3230D/F4230D series transceivers: [P0], [P1], [P2], [P3], [Side1], [Side2], [Side3] and [Emer] IC-F5220D/F6220D series transceivers: [UP], [DOWN], [P0], [P1], [P2] and [P3] Consult your Icom dealer or system operator for details con- cerning your transceiver’s programming. - Page 4 PREPARATION Programmable key functions (Continued) ■ Programmable key functions availability Analog Digital Programmable key Reference IC-F3210D/ IC-F3230D/ IC-F5220D/ IC-F3210D/ IC-F3230D/ IC-F5220D/ functions F4210D series F4230D series F6220D series F4210D series F4230D series F6220D series CH Up/Down ✔ ✔ ✔ ✔ Zone ✔...
- Page 5 PREPARATION Analog Digital Programmable key Reference IC-F3210D/ IC-F3230D/ IC-F5220D/ IC-F3210D/ IC-F3230D/ IC-F5220D/ functions F4210D series F4230D series F6220D series F4210D series F4230D series F6220D series Encryption p. 4 ✔ ✔ ✔ Hook Scan ✔ ✔ User Set Mode ✔ ✔ ✔...
- Page 6 PREPARATION Programmable key functions ■ Programmable key functions LONE WORKER EMERGENCY When the Lone Worker function is turned ON, and no opera- Hold down for 1 second to turn ON the Emergency func- ➥ tion occurs during the preprogrammed time period, the Emer- tion.
- Page 7 PREPARATION DIGITAL BUTTON STATUS UP, STATUS DOWN <For the IC-F3210D/F4210D series transceivers> <For the IC-F3210D/F4210D series transceivers> <For the IC-F3230D/F4230D/F5220D/F6220D series transceivers> <For the IC-F3230D/F4230D/F5220D/F6220D series transceivers> Push to enter the application selection mode*. When a received SDM (Short Data Message) is displayed, ➥...
- Page 8 PREPARATION Programmable key functions ■ Programmable key functions (Continued) INDIVIDUAL RESET <For the IC-F3210D/F4210D series transceivers> Push to reset the destination unit ID and call type to the ➥ default, if they have been changed by the manual opera- tion. <For the IC-F3230D/F4230D/F5220D/F6220D series transceivers>...
- Page 9 PREPARATION SITE SELECT STATUS <For the IC-F3210D/F4210D series transceivers> <For the IC-F3210D/F4210D series transceivers> Hold down for 1 second to transmit the currently selected sta- tus message to the specified station/Talkgroup. <For the IC-F3230D/F4230D/F5220D/F6220D series transceivers> (This key is used for only Multi-site Trunk operation.) <For the IC-F3230D/F4230D/F5220D/F6220D series transceivers>...
-
Page 10: Idas Operation
IDAS OPERATION IDAS operation ■ Single-site Trunking operation The transceiver provides Icom Digital Advanced System (IDAS) that meets the 6.25 kHz emission mask requirements The Single-site Trunking system enables further effective for narrow banding, and increases efficiency of channel al-... -
Page 11: Receiving A Call
IDAS OPERATION Receiving a call ■ Receiving a Voice Call Receiving a Call Alert When a Voice call is received: When a Call Alert is received: • Mute is released. • Beeps sound. • Either the calling station or Talkgroup ID name (or code) is •... - Page 12 IDAS OPERATION Receiving a call ■ Receiving a Status Message Receiving a Call Alert (Continued) Hold down [PTT], then speak into the microphone. When a Status Message is received: Release [PTT] to receive a response. • Beeps sound. • The calling station or Talkgroup ID name (or code) and the status message are alternately displayed.* •...
- Page 13 IDAS OPERATION Receiving a Message NOTE for the IC-F3230D/IC-F4230D series and IC-F5220D/ When a Message is received: IC-F6220D series transceivers: • Beeps sound. When the received message includes more than 8 charac- • The calling station ID or Talkgroup name (or code) and the mes- ters, the message automatically scrolls, when the automatic sage blink.* scroll function is activated.
- Page 14 IDAS OPERATION Receiving a call (Continued) ■ Receiving a Stun, Kill or Revive Receiving a Remote Monitor, Radio Check or Status Polling Call If an individual call with a Stun or Kill command is received (RAN code matching may not be necessary depending on If an individual call with Remote monitor, Radio check or Sta- the presetting), the transceiver will display “SORRY”...
- Page 15 IDAS OPERATION Receiving an Emergency call When an emergency call is received: When the Send Ack function is turned ON, the transceiver • Beeps sound. automatically transmits an acknowledgement to the calling • The emergency text and the calling station ID name (or code) station, if the received call type is Talkgroup or All Call.
- Page 16 IDAS OPERATION Receiving a call (Continued) ■ Displaying the received call log The transceiver stores a log of all calls in memory, if acti- Push [Digital Button] again to display the call log informa- vated. tion. Up to 10 call logs can be stored, and the oldest call record When a log information is displayed is erased when an 11th call is received.
- Page 17 IDAS OPERATION When no log information is available For the IC-F3230D/F4230D series transceivers For the IC-F5220D/F6220D series transceivers Push [CH Up] or [CH Down] to select the desired log. Hold down [PTT] to send the voice call. • A voice call can be made with the logged station.
-
Page 18: Transmitting A Call
IDAS OPERATION Transmitting a call ■ IDAS operation allows you to make a call to a specific station For the IC-F3230D/F4230D series transceivers (Individual call) or to a particular group (Talkgroup call). Other digital mode transceivers on the channel will not receive a call that does not match their individual or talkgroup ID and/or RAN (Radio Access Number) code. - Page 19 IDAS OPERATION Push [Digital Button] again to enter the destination ID se- Hold down [PTT], then speak into the microphone to send lection mode. a voice message to the selected station or talkgroup. • The preprogrammed ID name is displayed. Release [PTT] to receive.
- Page 20 IDAS OPERATION Transmitting a call (Continued) ■ Transmitting a Call Alert Call Alert allows you to notify another user who may be away < For the IC-F3230D/IC-F4230D series and IC-F5220D/IC-F6220D series transceivers> from the transceiver that you want to talk. Push [Digital Button] to enter the application selection mode.
- Page 21 IDAS OPERATION Transmitting a Status Message Push [CH Up] or [CH Down] to select the desired ID name The transceiver has the ability to send a preprogrammed sta- (or ID code). tus message. There are 100 status messages that can be sent. For the IC-F3230D/F4230D series transceivers <...
- Page 22 IDAS OPERATION Transmitting a call ■ Transmitting a Status Message (Continued) < For the IC-F3230D/IC-F4230D series and Push [CH Up] or [CH Down] to select the desired mes- IC-F5220D/IC-F6220D series transceivers> sage. Push [Digital Button] to enter the application selection For the IC-F3230D/F4230D series transceivers mode.
- Page 23 IDAS OPERATION Push [PTT] to transmit the status message to the selected Push [Digital Button] again to enter the destination ID se- station or talkgroup. lection mode. • “STAT TX” is displayed. • The preprogrammed ID name is displayed. Release [PTT]. •...
- Page 24 IDAS OPERATION Transmitting a call (Continued) ■ Transmitting a Message < For only the IC-F3230D/IC-F4230D series and Push [CH Up] or [CH Down] to select the desired mes- IC-F5220D/IC-F6220D series transceivers> sage. The transceiver has the ability to send a preprogrammed •...
- Page 25 IDAS OPERATION Push [PTT] to transmit the message to the selected station Push [Digital Button] again to enter the destination ID se- or talkgroup. lection mode. • “MSG TX” is displayed. • The preprogrammed ID name is displayed. Release [PTT]. •...
- Page 26 IDAS OPERATION Transmitting a call (Continued) ■ Direct message input (10-key version only) • Available characters Push [Digital Button] to enter the application selection mode. Characters • “VOICE” appears. 0 | ! ? ’ ” , ; : _ ( ) < > [ ] •...
- Page 27 IDAS OPERATION Transmitting an Emergency Call When [Emergency] is held down for a specified time period, IMPORTANT: It is recommended an emergency channel be a digital command emergency signal is transmitted once or separately set to provide reliable emergency call operation. repeatedly* on the emergency channel.
- Page 28 IDAS OPERATION Transmitting a call (Continued) ■ Direct ID input Direct ID list number input (10-key version only) (10-key version only) Depending on the presetting, you can directly input the de- Depending on the presetting, you may select the Individual or sired Individual or Talkgroup ID.
-
Page 29: Position Data Transmission
IDAS OPERATION Position data transmission Status message transmission ■ ■ When a GPS receiver is connected to the transceiver, the lon- The status message can be automatically transmitted. gitude and latitude position data can be automatically trans- The status message is transmitted when: mitted when: •... -
Page 30: Auto Ch Reserve Function
IDAS OPERATION Auto CH Reserve function Talk Back function ■ ■ If enabled, this feature is effective when a subscriber attempts The Talk Back function allows you to select the same call type to push [PTT] while the site is in an “All Trunks Busy” status, (Individual or Talkgroup) for the received call. -
Page 31: Roaming Function (Multi-Site Trunking Mode Only)
IDAS OPERATION Roaming function Site Lock function ■ ■ (Multi-site Trunking mode only) (Multi-site Trunking mode only) The Multi-site Trunking mode allows the transceiver to move The [Site Lock] key allows you to lock the transceiver to the to another site, according to the preprogrammed roaming currently registered site, and the roaming and the background list*, in order to find a site that has a higher quality signal, or scans are inhibited. - Page 32 A-7084-1EX-q 1-1-32 Kamiminami, Hirano-ku, Osaka 547-0003, Japan © 2013 Icom Inc.